where is the center point of ADIS16448/PCBZ ?
hi i need to connect my ADIS16448/PCBZ to my PCB. but i've been asked to know the center point of it. i've searched the datasheetbut i couldn't find it. can u help me with this?
View ArticleADXL345 Z-Axis problems
Hello, I've seen many people reporting Z-axis reading problems with the ADXL345 here and on other communities, but no solution nor explanation. Could it be a deffective batch? I have 4 breakout boards...
View ArticleProblem with adxl345(#028-2973PHIL)
Hey,I have a problem with the ADXL345 (# 028-2973 PHIL) am unable to initialize it. This also goes for the other 100 pieces that I bought. But the ADXL345 (# 222-8274PHIL) works just fine! This also...
View ArticleI am having Z-axis issues with the ADXL345 which seems to be related to...
I have several ADXL345 parts that weren't reading high enough in the z-axis. After re-soldering or replacing the part, the z-axis reading improved enough to pass my test limits. I am curious if it...
View ArticleADXL345 Z-axis reading
Hello, Regarding this topic http://ez.analog.com/message/81854#81854 I'm having the exact same problem with the Z-axis ! X and Y axes are working well, but the issue is with the Z-axis ..1- When using...
View ArticleClik here to view.
ADIS16480 large gyro bias and output drifts
When using the ADIS16480 for integrated navigation, abnormal outputs of gyroscope sensor occurred frequently. At the beginning of navigation applications, the output of the gyroscope sensors are quite...
View ArticleADIS16448 DNC and GND Connections?
I have noticed 2 errors in the wiring harness /PCB we are using to interface with the ADIS16448, and wanted to know if this issue will affect performance of the device in any way. I have run the IMU...
View ArticleClik here to view.
ADXL345 Basics understanding for newbie
Hi all i am using ADXL345 accelerometer. I am trying to evaluate the features available in the Acceleometer. I have few queries since i am newbie to this.1. First i tried to read the output data...
View ArticleADIS16480 Kalman Filter/RTC Configuration Questions
Hello, I've received the replacement unit. Now Kalman is working properly. I just have other issues. First I got a problem with the RTC. I connected the VDDRTC to a powersource to be able to save time...
View ArticleADXL362 Interrupt questions and weird behaviour
Using the EVAL-ADXL362ZHi, I try to reliably detect an inactivity and activity on INT1. It seems to work OK, but then something weird happens. Inactive is triggered again, and again forever. It times...
View Articlehelp selecting a couple of accelerometers please
Hi:I need help with selecting accelerometers from the Analogue Devices Company please. I would like to measure gravity dynamically by the use of an "analogue output" accelerometer NOT a digital type...
View ArticleQueries on ADIS16405 & ADIS16448 temperature sensor reading
Hi, I am working on a small satellite project which uses both of the MEMS IMU mentioned in the title in our hardware. I noticed that there is an huge difference in the temperature reading (around 11...
View ArticleEval Adis -16229 Setup
Hi, I recently bought the ADIS Eval kit and the ADIS 16229 Sensor. I received the eval kit board, the sensors, screws and bolts ADI Part#57269. I'm pretty sure I'm still missing a part to complete the...
View ArticleADXL193 Bessel filter
Can someone please confirm this? The 400 Hz Bessel filter built into the ADXL193 - any vibrations with greater than 400 Hz freqency are attentuated (ideally to zero, but I know filters don't roll off...
View ArticleLongevity of the ADXL103/ADXL203 analog accelerometers
Hello, I guess this question is directed towards someone at Analog Devices since it has to do with the long-term availability of the ADXL103/ADXL203 series of analog one- and two-axis accelerometers.I...
View ArticleClik here to view.
ADIS16488A SPI Communication Troubles
Hey everybody, first post here, so let me know if I leave out some vital information. I work in a lab at a school, and we have been trying to read data from our ADIS16488A IMU with a Beaglebone Black's...
View ArticleClik here to view.
ADIS16480 large gyro bias and output drifts
When using the ADIS16480 for integrated navigation, abnormal outputs of gyroscope sensor occurred frequently. At the beginning of navigation applications, the output of the gyroscope sensors are quite...
View ArticleADXL103/ADXL203 0 g Offset Long Term Drift
Hi, ADXL103/ADXL203 contains 0 g Offset vs. Temperature parameter. Did you specified 0 g Offset Long Term Drift (0 g Offset vs. Time)? If yes, where I can find the data? Regards,Ivan
View ArticleEVAL-ADXL313-Z Documentation
Hi, Can someone tell me if there is a PDF document for the evaluation board? Cannot seem to find it anywhere. Thanks!
View ArticleClik here to view.
ADIS16210 angle error problem
Hi,We have an ADIS16210 mounted in an instrument that moves in a circle as seen in the picture. The sensor is represented by the box to the right at the top. The distance d is 240 and r is 400 mm. The...
View Article
